According to the material process to distinguish between the advantages and disadvantages of the standard lamps
Release time:
2021-03-19
In the stage lighting market, there are some merchants who mix fish eyes with pearls. They imitate brand lighting by reducing materials and materials. Take the hardware part as an example. Whether the hardware cutting surface of a lamp has a seam surface or not, and whether electroplating has reached several M quality, is its standard coefficient. The electroplating M quality here is equivalent to painting. The first paint is 300 yuan, the second paint is 300 yuan, and the third paint is 300 yuan. Electroplating is like painting, the thicker the electroplating, the slower the oxidation of the protective layer. In order to save costs, the electroplating process of inferior lamps will inevitably cut corners. There will also be differences in glass technology, because the glass and hardware of each lamp belong to a whole, and the glass of lamps and lanterns cannot be as thin as egg shells. This is not superb technology, but cutting corners. Originally, 200 pieces of glass could be made by cutting corners and 400 pieces. If 400 pieces of glass are made in Spain, only 40 pieces may be selected after screening, and the price will be ten times higher. This is related to the process of production, glass in the production process, bubbles are inevitable. If there is no selection, all manufactured products are sold, and the cost is naturally low, but only 40 Class A products without bubbles can be selected. The lamp is used for viewing from a distance. A little bubble is normal, but there is a standard that cannot exceed the size of rice grains. Consumers can use this standard to purchase lamps. Of course, not only glass, other aspects can also distinguish the quality of lamps and lanterns, there is a better way in electroplating. Take a white postcard to the surface of the lamp for reflection and see if there are any thick lines. If there are black spots on the radiation surface, it means that the electroplating layer spits acid, which is defined as "cancer" under the lamp in our industry ". You can also use HB pencil to draw a layer on the surface of the hardware. If you leave traces, the plating layer is not enough. This is usually the method used in our industry when inspecting, and consumers can also try it. The value of a lamp is good or bad in the first depends on the material, the second depends on the production process. If there are a lot of handmade lamps, the price will definitely be higher than that of running water. The coverage of the lamp is assessed by the content of art. Art cannot be determined. It can only be determined according to the different manufacturing processes and the quality of the lamp according to the quality of the material. Everyone should have the idea that the price of a lamp is reasonable and cost-effective. It should not be judged by discount, but by value and quality.
In the stage lighting market, there are some merchants who mix fish eyes with pearls. They imitate brand lighting by reducing materials and materials. Take the hardware part as an example. Whether the hardware cutting surface of a lamp has a seam surface or not, and whether electroplating has reached several M quality, is its standard coefficient. The electroplating M quality here is equivalent to painting. The first paint is 300 yuan, the second paint is 300 yuan, and the third paint is 300 yuan. Electroplating is like painting, the thicker the electroplating, the slower the oxidation of the protective layer. In order to save costs, the electroplating process of inferior lamps will inevitably cut corners.
There will also be differences in glass technology, because the glass and hardware of each lamp belong to a whole, and the glass of lamps and lanterns cannot be as thin as egg shells. This is not superb technology, but cutting corners. Originally, 200 pieces of glass could be made by cutting corners and 400 pieces. If 400 pieces of glass are made in Spain, only 40 pieces may be selected after screening, and the price will be ten times higher.
This is related to the process of production, glass in the production process, bubbles are inevitable. If there is no selection, all manufactured products are sold, and the cost is naturally low, but only 40 Class A products without bubbles can be selected. The lamp is used for viewing from a distance. A little bubble is normal, but there is a standard that cannot exceed the size of rice grains. Consumers can use this standard to purchase lamps.
Of course, not only glass, other aspects can also distinguish the quality of lamps and lanterns, there is a better way in electroplating. Take a white postcard to the surface of the lamp for reflection and see if there are any thick lines. If there are black spots on the radiation surface, it means that the electroplating layer spits acid, which is defined as "cancer" under the lamp in our industry ". You can also use HB pencil to draw a layer on the surface of the hardware. If you leave traces, the plating layer is not enough. This is usually the method used in our industry when inspecting, and consumers can also try it.
The value of a lamp is good or bad in the first depends on the material, the second depends on the production process. If there are a lot of handmade lamps, the price will definitely be higher than that of running water. The coverage of the lamp is assessed by the content of art. Art cannot be determined. It can only be determined according to the different manufacturing processes and the quality of the lamp according to the quality of the material. Everyone should have the idea that the price of a lamp is reasonable and cost-effective. It should not be judged by discount, but by value and quality.
Related News
Leding Solid State Lighting Ltd.
Add.: No.5, First Road, Sanjiang Industrial Park, Hengli Town, Dongguan City,China
Email: sales.leding@interled.com.cn
Tel: +86-769-8118 0883
QQ：2269170096
Focus on us
